of days using the most commonly recommended dosage schedules. Serum monitoring of pre-dose levels is recommended, particularly for severe infections.
In the UK resistance is well recognised in enterococci and coagulasenegative staphylococci and, more worryingly, is now emerging in
S. aureus.
Uses
Serious Gram + ve infections:
• prophylaxis and treatment of infective endocarditis (usually combined with gentamicin)
• dialysis-associated peritonitis
• infection caused by MRSA
• prosthetic device infections due to coagulase-negative staphylococci
• alternative to penicillins and cephalosporins where patients are allergic
Contraindications
Hypersensitivity
Administration
IV bolus: 400 mg 12 hourly for 3 doses, then 400 mg daily. Give over 3–5 min
In obesity, use 6 mg/kg per dose (rounded to the nearest 100 mg) rather than 400mg
Reconstitute with WFI supplied. Gently roll the vial between the hands until powder is completely dissolved. Shaking the solution will cause the formation of foam. If the solution becomes foamy allow to stand for 15 min
Monitor: FBC, U&E, LFT
Serum pre-dose teicoplanin level
Pre-dose (trough) serum concentration should not be <10 mg/l For severe infections, trough serum concentration >20 mg/l is recommended. Levels are not essential for treatment In renal impairment: dose reduction not necessary until day 4, then reduce dose as below:
CC
(ml/min)
|
Dose
(mg)
|
Interval
|
20–25
|
400
|
every day
|
10–20
|
400
|
every 24–48 h
|
<10
|
400
|
every 48–72 h
|
How not to use teicoplanin
Do not mix teicoplanin and aminoglycosides in the same syringe
Adverse effects
Raised LFTs
Hypersensitivity
Blood disorders
Ototoxic
Nephrotoxic
Cautions
Vancomycin sensitivity
Renal/hepatic impairment
Concurrent use of ototoxic and nephrotoxic drugs
Organ failure
Renal: reduce dose
Renal replacement therapy
CVVH unknown dialysability, dose as in CC 10–20 ml/min, i.e. 400mg 12 hourly for 3 doses then 400 mg every 24–48 hours. HD/PD not dialysable, dose 400 mg 12 hourly for 3 doses then 400 mg every 48–72 hours. Can measure levels for therapy optimisation but is not
essential.
1 comments:
The pharma company should always provides with best products and with customer beneficial services as this is the need of the customers. One of the best antibiotics manufacturer provides products like Orlistat, Progesterone BP,Spiramycin,Tranexamic Acid BP,Methyl Prednisolone Sodium succinate,Teicoplanin in India and also are the and are also the Importers, Exporters and Manufacturers of chemical & Pharmaceuticals in India products and it strives to continuously upgrade the quality of its processes and products.
Post a Comment